March 16, 2025
Keeping tech free
A saga that began about four months ago has ended — or so it seems, On Thursday, Richard Stallman, founder and head of the GNU Project, officially said Goodbye to GNU Libreboot in an email on the GNU mailing list.
Inkscape, the very popular open source cross-platform vector drawing program, has released version 0.92. Check out the new features in this very nicely done video. (Note: The sound level is a bit loud in this video. You might want to turn the volume down on your computer before starting the video.)
[youtube https://www.youtube.com/watch?v=EI1hxXt9U4c?feature=oembed&w=500&h=281]
The program is so popular, a student in Los Altos, California, once asked his parents to get it for him as a Christmas present. Suppose your child’s fondest wish was to own a no-cost software program from which they could derive thousands of hours of use and enjoyment. Without knowing it, this child gave his parents a Christmas gift of their own. And the programmers who make Inkscape? They gifted the entire world with this wonderful program.
“What,” you may ask, “is Online Tek Squad?” I didn’t know, either, until a guy calling himself Paul, known to Caller I.D. as “Name Unavailable,” rang me up from what turned out to be a nonexistent phone number. Paul said he called me because my computer was infected with “over 30 viruses.” Wow. Good thing he got hold of me before the number climbed to 40 or 50, right?
The Video Screening Room Do you need to record multiple camera angle video for lectures or a conference? As you might expect, you get the…
The first broadcast of FM stereo in North Carolina was on WMDE, an FM-only radio station in Greensboro. I’m guessing that the time was late 1961 or early 1962, as the FCC approved FM stereo broabdasts in April, 1961. Dad ordered the stereo generator as soon as they became available. I was there the night it was installed. I would have been 10 at the time.
The station was no more than a control room and transmitter room, that had been built by my father and one of his friends in the corner of a brick building that had been some sort of garage, but which my father had turned into a television repair shop when he bought the building in the early 1950s. In the control room, the walls and ceiling from about waist high were covered with white acoustic tiles, made of compressed fiber, with holes to absorb sound. The bottom half of the walls were plywood painted light lime green, with a strip of molding running along the seam at the bottom of the tiles. Like nearly all control rooms, there was no outside window.
The console desk, also built by Dad, was a backwards “C,” built deep and sat against the transmitter room wall. The console was a small Gates Studioette, bought new in 1956, which could mix from four sources. To expand its mixing capabilities, there were switches that the operator could use to take audio from additional sources and assign them a pot. It was a Gates, so it was well designed and built. Rek-O-Kut Rondine turntables with Gray hydrolic tone arms sat on each side of the operator.
These are the ten most read articles on FOSS Force in 2016. 1. SourceForge and Slashdot Have Been Sold by Christine Hall. Published January 28,…
These are the ten most read articles on FOSS Force for the month of December, 2016. 1. Make Raspberry Pi Portable With 5-inch Touch Screen…
Those who are new to Linux might just go to work right away after installing, or having someone else install, GNU/Linux. However, there are a few things you should do first. Some of them, such as updating your system and activating the firewall, are essential. Others are just things you do to customize your Linux experience.
Here’s a short checklist of things to do after you get Linux up-and-running on your computer. You should consider the first two items on this list as being required, with all the other items being optional. The list is specific to Linux Mint 18.x Xfce Edition, so if you’re using another flavor of Linux, you’ll be better off searching for another list.
For too long, much of our science has been kept behind doors that are both closed and locked. It’s past time to bring openness to…
Oh, drat. I’ve done gone and procrastinated too much again.
Shortly after Clem Lefebvre and his buddies released the Xfce edition of Mint 18 — that’s “Sarah” for those who prefer names to numbers — I installed it on one of the laptops I keep at the office so I could write a review. I even took the laptop with me to All Things Open in late October to give it a good workout — which I did writing my coverage of the conference for “another website.”
I never did get around to writing the review, but it’s always been on the back burner. I’d get it written before the next version of Mint is released, I figured.
Just as GNU/Linux is the world’s best known open source operating system, bitcoin is the best known open source cryptocurrency, which revived and gave new…
